98
Printer Configuration Menus
COPY USB FILE TO E:
Description: Select files to copy to the printer from a USB Flash drive. See the exercises
in
Using the USB Hosts Port and the NFC Capabilities on page 261 for an exercise using this
capability.
To copy files to the printer from a USB Flash drive:
1. Insert a USB flash drive into the printer’s USB host port.
2. The printer lists available files.
SELECT ALL is available to copy all available files from
the USB Flash drive.
3. Use the UP ARROW or DOWN ARROW to select a file from this menu.
4. Press RIGHT SELECT to select
STORE.
Accepted values:
NONE, SELECT ALL or PROGRAM FILE NAMES
SGD command used: usb.host.read_list
Print Server web page:
Not Applicable
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
CONFIG INFO TO USB
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
PRINT TEST FORMAT