BMW R 1150 RT Repair Manual

11.48
11 21 Installing crankshaft
e Attention:
Oil the bearings.
11 31
Installing timing chain tensioning
and slide rails
•
Seal pivot pin for tensioner rail/slide rail at clutch
side (arrow) with 3-Bond 1209.
•
Insert pivot screw (1) into chain tensioner rail, us-
ing a new seal.
X Tightening torque:
Chain rail pivot pin........................................ 18 Nm
11 31
Installing auxiliary shaft/timing
chains
•
When installing the auxiliary shaft (2), ensure that
its dowel pin socket is aligned with the housing
flange on the side toward the crankshaft.
e Attention:
Timing chains (3) must mesh fully with auxiliary shaft
sprockets.
S110080
u
3
1
2

BMW R 1150 RT Specifications

General

Displacement	1130 cc
Transmission	5-speed
Final Drive	Shaft
Bore x Stroke	101 mm x 70.5 mm
Compression Ratio	10.3:1
ABS	Optional
Engine Type	Air/oil-cooled, four-stroke, Boxer twin
Power	95 hp at 7, 250 rpm
Torque	100 Nm at 5, 500 rpm
Dry Weight	259 kg
Front Suspension	Telelever
Rear Suspension	Paralever
Front Brakes	Dual disc
Rear Brakes	Single disc
Wheelbase	1485 mm (58.5 in)