BMW R 1150 RT Repair Manual

BMW Motorrad
Pre-delivery check
R 1150 RT
Customer Licence No.
Job Order No. Mechanic’s signature
BMW
Pre-delivery check
Check the shipping pallet for damage
Unpack the motorcycle
Inspect motorcycle for damage
Check to ensure that consignment is complete:
– Vehicle keys
– Onboard tool kit and literature
– All optional extras
Installing remaining items on motorcycle
Fill and charge battery (record charging date)
[Integral ABS] Perform bleed test with BMW MoDiTeC
Check engine oil when cold, correct as required
Check tyre pressures
Check tightness of rear lug bolts (note torque specification!)
Fill with fuel
Check headlight beam angle, adjusting if necessary
Final inspection and function check
– Clutch, shift mechanism
– Handbrake and foot brake
– Lighting and signal indicators, warning and indicator lamps, instruments
– Check operation of standard and optional equipment
– Road test as indicated
Confirm pre-delivery check in “Service and Technical Booklet“
Final cleaning
Vehicle delivered on:
UX-VS-2, 07.2001
BMW recommends Castrol

BMW R 1150 RT Specifications

General

Displacement	1130 cc
Transmission	5-speed
Final Drive	Shaft
Bore x Stroke	101 mm x 70.5 mm
Compression Ratio	10.3:1
ABS	Optional
Engine Type	Air/oil-cooled, four-stroke, Boxer twin
Power	95 hp at 7, 250 rpm
Torque	100 Nm at 5, 500 rpm
Dry Weight	259 kg
Front Suspension	Telelever
Rear Suspension	Paralever
Front Brakes	Dual disc
Rear Brakes	Single disc
Wheelbase	1485 mm (58.5 in)