4-8
Confidential
(10) Wait for the confirmation screen of the serial number entered and the head property code to
appear, then click Yes.
(11) Use Maintenance mode 80 to display the serial number and head property info and check
that the entered data is correct.
1.7 Restore machine information (Maintenance mode 46)
Restore the machine information and user setting information that have been backed up in an
external memory, referring to Chapter 5, Section 1.3.13.
If the machine information is successfully restored, it is not necessary to perform operations
given in Sections 1.8 to 1.14.
If the machine has failed to restore the machine information from the external memory, replace
the ink absorber box and flushing box and then reset their counts using the procedure given in
Section 1.14.
1.8 Adjust the touch panel (Maintenance mode 78)
Adjust the touch panel, referring to Chapter 5, Section 1.3.31.
1.9 Update the head property data (Maintenance mode 68)
Update the head property data, referring to Chapter 5, Section 1.3.25.
The head property data can also be updated with the service setting tool (BrUsbSn.exe). For
details, refer to Section 1.6.
1.10 Acquire white level data (Maintenance mode 55)
Acquire white level data, referring to Chapter 5, Section 1.3.17.
1.11 Adjustment of vertical print lines/software correction for inclination/
corrugation/ruled lines (Maintenance mode 65)
Refer to Chapter 5, Section 1.3.23.
1.12 Update the paper feeding correction values (Maintenance mode 58)
Refer to Chapter 5, Section 1.3.19.
1.13 Adjust margins in borderless printing (Maintenance mode 66)
Refer to Chapter 5, Section 1.3.24.
1.14 Reset purge and flushing counts
(1) Switch the machine to the maintenance mode.
(2) Press the 8 and 0 keys in this order.
(3) Press the key several times until the purge (or flushing) count appears on the LCD.
(4) Press the 2, 7, 8 and 3 keys in this order to reset the purge (or flushing) count.
(5) When the count is reset, the machine automatically returns to the initial stage of the
maintenance mode.
To Next Page
Loading...
Need help?
General
