5-52
Confidential
1.3.27 Customizing Destinations (Maintenance mode 74)
< Function >
This procedure customizes the machine according to settings of the language, functions, and
worker switches.
< Operating Procedure >
(1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The "Select 74?" appears on the LCD.
(2) Press the Mono Start key to display the current settings on the LCD.
(3) Enter the desired customizing code.
(4) Press the Mono Start key to save the new setting and return the machine to the initial stage
of the maintenance mode.
If the destination is changed, the "PLS UPDATE PROG" appears on the LCD. Load the
latest firmware (refer to Chapter 4, Section 1.3).
(5) Pressing the Stop key during the above procedure returns the machine to the initial stage of
the maintenance mode without saving the customizing code.
Note: If no keys are pressed for at least one minute with any display state, the machine
automatically returns to the initial stage of the maintenance mode.
< Destination Customizing Codes List >
USA Canada Brazil Argentina Chile Germany
Austria
DCP-J4110DW-----0003
MFC-J4310DW 0001 0002 0042 0036 0036 -
MFC-J4410DW 0101 0102 ---0103
MFC-J4510DW 0001 0002 0042 0036 0036 0003
MFC-J4610DW 0201 0202 ---0203
MFC-J4710DW 0001 0002 ---0003
MFC-J2310 - -----
MFC-J2510 - -----
To Next Page
Loading...
Need help?
General
