Brother MFC-J2310 Service Manual

4-13
Confidential
2.1 Update the head property data (Maintenance mode 68)
Update the head property data, referring to Chapter 5, Section 1.3.25.
The head property data can also be updated with the service setting tool (BrUsbSn.exe).
The head property data updating procedure is given below.
(1) Turn the machine on and switch it to the maintenance mode.
(2) Connect the machine to your PC using a USB cable.
(3) On the PC, run the service setting tool (BrUsbSn.exe) to display the following window.
(4) In Product Category, select 1. Ink-Model.
(5) Select 2012 Model_1.
(6) In Port on the BrUsbSn screen, select the port number assigned to the Brother
Maintenance USB Printer.

Brother MFC-J2310 Specifications

General

Brand	Brother
Model	MFC-J2310
Category	All in One Printer
Language	English