Brother MFC-J2310 Service Manual

Confidential
2-55

Error Code BF
Document scanning position sensor detects size that its length does not fit duplex scanning.
User Check
- Check whether the document scanned is longer than the specified limit.
- Remove the jammed document.
 Error Code DF
SDAA communication failure
Error Code E0
Modem does not start normally even after resetting the modem.
 Error Code E2
Wired LAN MAC address not registered..
Unable to Print BF
LCD
Step Cause Solution
1 Document scanning position
actuator caught on the
surrounding parts
Set the document scanning position actuator into
place.
2 Document scanning position
sensor defective
Replace the document scanning position sensor.
3 ADF motor defective Replace the ADF motor.
4 Document feed roller worn out Replace the ADF unit.
5 Main PCB defective Replace the main PCB ASSY.
Unable to Print DF
LCD
Unable to Print E0
LCD
Step Cause Solution
1 MJ PCB defective Replace the MJ PCB ASSY.
2 Main PCB defective Replace the main PCB ASSY.
Unable to Print E2
LCD
Step Cause Solution
1 Main PCB defective Replace the main PCB ASSY.

Brother MFC-J2310 Specifications

General

Brand	Brother
Model	MFC-J2310
Category	All in One Printer
Language	English