Brother MFC-J2310 Service Manual

4-25
Confidential
6.1 Check head nozzles (Maintenance mode 09)
Check head nozzles, referring to Section 2.3.
6.2 Adjustment of vertical print lines/software correction for inclination/
corrugation/ruled lines (Maintenance mode 65)
Refer to Chapter 5, Section 1.3.23.
6.3 Update paper feeding correction values (Maintenance mode 58)
Refer to Chapter 5, Section 1.3.19.
6.4 Adjust margins in borderless printing (Maintenance mode 66)
Refer to Chapter 5, Section 1.3.24.
6.5 Check printing
Update the paper feeding correction value
Check the test patterns, referring to Chapter 5, Section 1.3.19.
Adjustment of vertical print lines/software correction for inclination/corrugation/ruled
lines
Check the test patterns, referring to Chapter 5, Section 1.3.23.
Adjust margins in borderless printing
Check the test patterns, referring to Chapter 5, Section 1.3.24.

Brother MFC-J2310 Specifications

General

Brand	Brother
Model	MFC-J2310
Category	All in One Printer
Language	English