Get started with Connect IT 16/48 Verify product components
Digi Connect IT® 16/48 User Guide
21
Required additional equipment
Equipment Description
Power supply kit
Each kit includes three items: two power supply items and one fan
item. These items are connected to the Connect IT 16/48. See
Connect the power supplies and fans.
You can choose between the following two kits:
n ITPS-PSEK: Connect IT 16/48 power supply kit, port-side
exhaust. Use this when the serial ports will be in the hot
aisle. The thumb screws used to connect the items to the
Connect IT are blue.
n ITPS-PSIK: Connect IT 16/48 power supply kit, port-side
intake. Use this when the serial ports will be in the cold
aisle. The thumb screws used to connect the items to the
Connect IT are red.
Power cord IEC 60320 power cord
Optional additional equipment
Equipment Description
COREmodule
Note This is required only if you want to connect to a cellular
network. A SIM card is also required.
SIMcard
An activated SIM card provided by your cellular network operator.
You can insert up to two SIMcards in the CORE module. See
Connect hardware and connect to a cellular network.
The COREmodule supports the standard mini-SIM cards (2FF).
Note This is required only if you are using a COREmodule to
connect to a cellular network.
To Next Page
Loading...
Need help?
General