Digi Connect IT 16 User Manual

Hardware Back panel and LEDs
Digi Connect IT® 16/48 User Guide
689
Item Name Description
8 Serial ports
Connect equipment to a serial port to provide console access to
the equipment through the cellular network. See Connect
equipment to the Connect IT serial ports.
n Connect IT 16: serial ports 1-16.
n Connect IT 48: serial ports 1-48.
The LED on the left lights:
n Yellow: There is activity on the port.
n Green: The port is in use.
The LED on the right for ACT lights yellow.
Back panel and LEDs
Item Name Description
1 Power and fan item
Connect the power supply and fan unit to the device.
For installation information, see Connect the power
supplies and fans.
2 WWAN2
Antennas can be attached if the module is used to
complete a cellular connection. See Connect
hardware and connect to a cellular network.
3 COREmodule
The COREmodule is used to complete a cellular
connection. See Connect hardware and connect to a
cellular network.
4 WWAN1
Antennas can be attached if the module is used to
complete a cellular connection. See Connect
hardware and connect to a cellular network.
5 Reset
Press this switch to reset the device.
See Use the RESETbutton to reset your device to the
factory defaults.

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English