Digi Connect IT 16 User Manual

User authentication User authentication methods
Digi Connect IT® 16/48 User Guide
492
Add a new authentication method
Required configuration items
n The types of authentication method to be used:
To add an authentication method:
WebUI
1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Methods.
4. For Add Method, click .
5. Select the appropriate authentication type for the new method from the Method drop-down.
Note Authentication methods are attempted in the order they are listed until the first
successful authentication result is returned. See Rearrange the position of authentication
methods for information about how to reorder the authentication methods.
6. Repeat these steps to add additional methods.
7. Click Apply to save the configuration and apply the change.
Command line

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English