Digi Connect IT 16 User Manual

Configuration and management Review Connect IT 16/48 default settings
Digi Connect IT® 16/48 User Guide
30
Interface type
Preconfigured
interfaces Devices Default configuration
n SFP2 n Ethernet:
SFP2
n Firewall zone: Internal
n WAN priority: Metric= 5
n l IP Address: DHCP
client
n Digi SureLink
TM
enabled for IPv4
Wireless Wide Area
Networks (WWAN)
n WWAN n WWAN
cellular
modem
n Firewall zone: External
n WAN priority: Metric=3
n SIM failover after 5
attempts
Local Area Networks (LANs)
n Loopback n Ethernet:
Loopback
n Firewall zone:
Loopback
n IP address: 127.0.0.1/8
n Default IP n Ethernet: ETH2 n Firewall zone: Setup
n IP address
192.168.210.1/24
n Default Link-
local IP
n Ethernet: ETH2 n Firewall zone: Setup
n IP address
169.254.100.100/16
Other default configuration settings
Feature Configuration
Central
management
n Digi Remote Manager enabled as the central management service.
Security policies
n Packet filtering allows all outbound traffic.
n SSH and web administration:
l Enabled for local administration
l Firewall zone: Internal
Monitoring
n Device heath metrics uploaded to Digi Remote Manager at 60 minute
interval.
n SNMP: Disabled
Serial port
n Enabled
n Serial mode: Login
n Label: None
n Baud rate: 115000
n Data bits: 8
n Parity: None
n Stop bits: 1
n Flow control: None

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English