Digi Connect IT 16 User Manual

User authentication Authentication groups
Digi Connect IT® 16/48 User Guide
500
l To disable Admin access for the admin group:
(config)> auth group admin acl admin enable false
(config)>
n Shell access:
l To enable Shell access for the serial group:
(config)> auth group serial acl shell enable true
(config)>
Shell access is not available if the Allow shell parameter has been disabled. See
Disable shell access for more information about the Allow shell parameter.
n Serial access:
l To enable Serial access for the admin group:
(config)> auth group admin acl serial enable true
(config)>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Add an authentication group
Required configuration items
n The access rights to be assigned to users that are assigned to this group.
Additional configuration items
n The serial ports that the user can access.
n Access rights to OpenVPN tunnels, and the tunnels to which they have access.
n Access rights to captive portals, and the portals to which they have access.
n Access rights to query the device for Nagios monitoring.
To add an authentication group:
WebUI

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English