Digi Connect IT 16 User Manual

Command line interface Configuration mode
Digi Connect IT® 16/48 User Guide
709
See Move within the configuration schema for more information about moving within the
configuration.
Save changes and exit configuration mode
To save changes that you have made to the configuration while in configuration mode, use save. The
save command automatically validates the configuration changes; the configuration will not be saved
if it is not valid. Note that you can also validate configuration changes at any time while in
configuration mode by using the validate command.
(config)> save
Configuration saved.
>
After using save to save changes to the configuration, you will automatically exit configuration mode.
To return to configuration mode, type config again.
Exit configuration mode without saving changes
You can discard any unsaved configuration changes and exit configuration mode by using the cancel
command:
(config)> cancel
>
After using cancel to discard unsaved changes to the configuration, you will automatically exit
configuration mode.
Configuration actions
In configuration mode, configuration actions are available to perform tasks related to saving or
canceling the configuration changes, and to manage items and elements in lists. The commands can
be listed by entering a question mark (?) at the config prompt.
The following actions are available:
Configuration actions Description
cancel Discards unsaved configuration
changes and exits configuration mode.
save Saves configuration changes and exits
configuration mode.
validate Validates configuration changes.
revert
Reverts the configuration to default
settings. See The revert command for
more information.
show Displays configuration settings.

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English