Digi Connect IT 16 User Manual

Monitoring intelliFlow
Digi Connect IT® 16/48 User Guide
623
intelliFlow
intelliFlow monitors system information, network data usage, and traffic information, and displays the
information in a series of charts available in the local WebUI. To use intelliFlow, the Connect IT 16/48
must be powered on and you must have access to the local WebUI. Once you enable intelliFlow, the
Status > intelliFlow option is available in the main menu. By default, intelliFlow is disabled.
intelliFlow provides charts on the following information:
n System utilisation
n Top data usage by host
n Top data usage by server
n Top data usage by service
n Host data usage over time
intelliFlow charts are dymanic; at any point, you can click inside the chart to drill down to view more
granular information, and menu options allow you to change various aspects of the information being
displayed.
Note When intelliFlow is enabled, it adds an estimated 50MB of data usage for the device by reporting
the metrics to Digi Remote Manager.
Enable intelliFlow
Required configuration items
n Enable intelliFlow.
Additional configuration items
n The firewall zone for internal clients being monitored by intelliFlow.
To enable intelliFlow:
WebUI
1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Monitoring > intelliFlow.
The intelliFlow configuration window is displayed.

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English