Command line interface Display status and statistics using the show command
Digi Connect IT® 16/48 User Guide
705
network interface lan ipv4 type "dhcp"
network interface lan zone "external"
network interface modem modem apn 0 apn "00000.000"
network interface modem modem apn_lock "true"
schema version "445"
>
show system
The show system command displays system information and statistics for the device, including CPU
usage.
> show system
Model : Digi Connect IT 16/48
Serial Number : Connect IT 16/48-000065
SKU : Connect IT 16/48
Hostname : Connect IT 16/48
MAC : DF:DD:E2:AE:21:18
Hardware Version : 50001947-01 1P
Firmware Version : 21.2.39.67
Alt. Firmware Version : 21.2.39.67
Bootloader Version : 19.7.23.0-15f936e0ed
Current Time : Fri, 26 Feb 2021 8:04:23 +0000
CPU : 1.4%
Uptime : 6 days, 6 hours, 21 minutes, 57 seconds (541317s)
Temperature : 40C
>
show network
The show network command displays status and statistics for network interfaces.
> show network
Interface Proto Status Address
---------------- ----- ------- -------------------------------
defaultip IPv4 up 192.168.210.1/24
defaultlinklocal IPv4 up 169.254.100.100/16
eth1 IPv4 up 10.10.10.10/24
eth1 IPv6 up fd00:2502::210:f3f3:fe7e:d53/64
eth2 IPv4 down
eth2 IPv6 down
lan IPv4 up 192.168.2.1
lan IPv6 up 0:0:0:0:0:ffff:c0a8:301
loopback IPv4 up 127.0.0.1/8
wan IPv4 up 192.168.3.1/24
wan IPv6 up fd00:2704::240:ffff:fe80:120/64
>