Digi Connect IT 16 User Manual

Command line interface Use the scp command
Digi Connect IT® 16/48 User Guide
703
Note For commands that operate on the Connect IT 16/48's file system, such as the cp, ls, and mkdir
commands, see File system for information about the file system, including how to copy, move and
delete files and directories.
Use the scp command
The scp command uses Secure Copy Protocol (SCP) to transfer files between the Connect IT 16/48
device and a remote host.
Required configuration items
n The hostname or IP address of the remote host.
n The username and password of the user on the remote host.
n Whether the file is being copied to the Connect IT 16/48 device from a remote host, or to the
remote host from the Connect IT 16/48 device.
l If the file is being copied to the Connect IT 16/48 device from a remote host:
o
The path and filename of the file on the remote host that will be copied to the Connect
IT 16/48 device.
o
The location on the Connect IT 16/48 device where the file will be copied.
l If the file is being copied to a remote host from the Connect IT 16/48 device:
o
The path and filename of the file on the Connect IT 16/48 device that will be copied to
the remote host.
o
The location on the remote host where the file will be copied.
Copy a file from a remote host to the Connect IT 16/48 device
To copy a file from a remote host to the Connect IT 16/48 device, use the scp command as follows:
> scp host hostname-or-ip user username remote remote-path local local-path to
local
where:
n hostname-or-ip is the hostname or ip address of the remote host.
n username is the name of the user on the remote host.
n remote-path is the path and filename of the file on the remote host that will be copied to the
Connect IT 16/48 device.
n local-path is the location on the Connect IT 16/48 device where the copied file will be placed.
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the Connect IT 16/48 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/Connect IT 16/48-
21.2.39.67.bin local /etc/config/scripts to local
admin@192.168.4.1's password: adminpwd
Connect IT 16/48-21.2.39.67.bin 100% 36MB 11.1MB/s 00:03
>

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English