Applications Run a Python application at the shell prompt
Digi Connect IT® 16/48 User Guide
449
c. Highlight the scripts directory and click to open the directory.
d. Click (upload).
e. Browse to the location of the script on your local machine. Select the file and click Open to
upload the file.
The uploaded file is uploaded to the /etc/config/scripts directory.
Command line
a. Log into the Connect IT 16/48 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
b. At the command line, use the scp command to upload the Python application script to the
Connect IT 16/48 device:
> scp host hostname-or-ip user username remote remote-path local local-
path to local
where:
n hostname-or-ip is the hostname or ip address of the remote host.
n username is the name of the user on the remote host.
n remote-path is the path and filename of the file on the remote host that will be
copied to the Connect IT 16/48 device.
n local-path is the location on the Connect IT 16/48 device where the copied file will
be placed.
For example:
To upload a Python application from a remote host with an IP address of 192.168.4.1 to
the /etc/config/scripts directory on the Connect IT 16/48 device, issue the following
command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/test.py local
/etc/config/scripts/ to local
admin@192.168.4.1's password: adminpwd
test.py 100% 36MB 11.1MB/s 00:03
>
c. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
To Next Page
Loading...
Need help?
General