Furuno TZTL12F User Manual

4. POINTS, EVENT MARKS
4-15
4.13 How to Restart or Cancel Navigation to a Point
4.13.1 How to restart navigation to a point
When you go to a point, you can restart
the navigation to the point from the cur-
rent location.
When you steer to keep away from an
obstruction or the ship drifts, you go off
course as shown in Line 1 in the figure.
If you do not need to return to the origi-
nal course, you can go to the point from
the current position as shown in Line 2 in
the figure.
1. Tap the red dashed line or the yellow line of the route to display the pop-up menu.
2. Tap [Restart]. The route start position for the route moves to the current position.
4.13.2 How to cancel navigation to a point
1. Tap any part of the route to display the pop-up menu.
2. Tap [Stop Nav].
The red dashed line, yellow line, XTE lines and arrival area circle are erased from the
screen.to
Line 2
Line 1
Obstacle
Original course

Furuno TZTL12F Specifications

General

Brand	Furuno
Model	TZTL12F
Category	Monitor
Language	English