Furuno TZTL12F User Manual

6. RADAR
6-8
6.8.4 How to measure the range and bearing to an object
Tap an object to get its range and bearing from own ship. Read the range and bearing
in the pop-up menu.
6.8.5 How to measure the range with the VRM
The VRM is a dashed ring so that you can identify the VRM from the fixed range rings.
Method 1: From the data area
Open the data area. Tap the VRM indication in the [EBL/VRM] box. Drag the VRM or
slider to set the VRM. Tap [End VRM] to anchor the VRM and finish. The range to the
VRM appears to the left of the slider bar and in the [EBL/VRM] data box.
To clear the VRM, open the pop-up menu, the tap [EBL] and [Clear].
Object
Range and bearing
to object
Acquire
New Point
Radar Adjust
Auto Sea Mode
Radar Filters
EBL
VRM
Goto
Tap
here.
OR
Drag slider
(or tap bar or +, - icons)
Drag slider
(or tap bar or +, - icons)
Tap [End VRM]
to anchor VRM
and exit.
Drag
VRM
EBL/VRM
box
Drag
VRM
Drag
VRM
Range to
object
Range to
object
RADAR
DATA
ROUTE
VRM
VRM
VRM
VRM

Furuno TZTL12F Specifications

General

Brand	Furuno
Model	TZTL12F
Category	Monitor
Language	English