1. SYSTEM INTRODUCTION
1-10
Red: Sensor error
Gray: Sensor inactive (stopped)
The Functions section provide the following features:
[MOB]: Enters a MOB mark (to mark man overboard location on the plotter and radar
displays). See section 1.17.
[Settings]: Menus (general, plotter, radar, sounder, etc.) for customization of the sys-
tem. See section 1.14.
[Tide]: Opens the tide graph.
[Lists]: Accesses the lists (points, routes, AIS, DSC, ARPA, Alarms).
[Catalog]: Opens the list of charts installed in your system.
[Fax30]*: Opens the FAX-30 operation screen.
[Fusion]*: Opens the FUSION operation screen.
[SiriusAudio]*: Opens the SiriusAudio control panel.
[eGuide]: Opens the abbreviated operator’s manual. You can get the latest version of
the operator’s manual by accessing the quick response code provided in the introduc-
tion section of the guide.
* Requires appropriate sensor. Not shown otherwise.
The Display icons select corresponding displays. See the next section for details.
1.6 How to Select a Display
You have two methods from which to select a display, the home screen and the quick
page.
1.6.1 How to select a display from the home screen
Tap the [Home] icon to show the home screen. Tap the applicable display icon. (It may
be necessary to swipe the screen if you have programmed a number of display icons.)
To Next Page
Loading...
Need help?
General