To Next Page

To Previous Page

6. RADAR

6-25

6.24.3 Racon (Radar Beacon)

A racon is a radar transponder that sends a characteristic signal when the racon re-

ceives a radar pulse (normally only the three-centimeter band). If the racon signal is

sent on the same frequency as that of the radar, the signal appears on the radar dis-

play. The racon signal appears on the radar in one of two methods:

• A line that starts just after the position of the Racon

• A Morse code signal displayed with a line just after the position of the Racon

Default Chapter2
- Important Notices2
- Safety Instructions3
- Table of Contents6
Foreword13
System Configuration15
1 System Introduction16
- Controls17
- Remote Control Unit (Option)20
  - Remote Control Unit MCU-00220
  - Remote Control Unit MCU-00421
- How to Turn the Power on or off22
- How to Adjust the Brilliance of the Display and Power Switch and Hue23
- Home Screen24
- How to Select a Display25
- Hidden Functions29
- Data Area31
- Plotter Introduction37
- Radar Introduction38
- Sounder (Fish Finder) Introduction39
- Settings Menu40
- Function Gesture43
- Language44
- Man Overboard (MOB)45
- Wireless LAN Settings46
2 Plotter50
- Chart Type50
- Display Range51
- Orientation Mode52
- How to Move the Chart52
- The Boat Icon53
- How to Information about a Chart Object, Chart55
  - Chart Object Information55
  - Chart Information56
- How to Find the Range and Bearing between Two Locations57
- Multiple Plotter Displays58
- Cartographic Text and Objects on Vector Charts59
  - Control Visibility of Text and Object Information in Vector Charts59
  - Control Visibility of Cartographic Objects in S-52 Charts60
- Alarms62
- Track66
- Plotter Menu73
- Navpilot-700 Series Auto Pilot74
  - How to Enable Use of the Navpilot74
  - How to Show the Navpilot Control Box in the Data Area75
- Activecaptain75
- My Friends (Social Network)77
  - How to Setup My Friends77
  - How to Show or Hide the My Friends Display78
500 D Display, Overlays80
- Display80
  - How to Activate the 3D Display81
  - How to Make the 3D View Clearer82
- Overlays83
4 Points, Event Marks92
- About Points, Event Marks92
- How to Enter a Point, Event Mark93
  - How to Enter a Point (Plotter and Radar Displays Only)93
  - How to Display Point, Event Mark Information94
- Event Mark Comment94
- Default Point Settings95
- How to Find Number of Points Used96
- How to Move a Point96
  - How to Move a Point on the Screen96
  - How to Move a Point from the Points List96
- How to Delete a Point97
- How to Edit a Point98
  - How to Edit a Point on the Screen98
  - How to Edit a Point from the Points List99
- How to Move a Point to the Screen Center101
- How to Show or Hide All Points or Points Names101
- How to Go to a Point101
- How to Restart or Cancel Navigation to a Point106
  - How to Restart Navigation to a Point106
  - How to Cancel Navigation to a Point106
5 Routes108
- What Is a Route108
- How to Create a Route109
- How to Edit a Route111
- Routes List113
- How to Find Number of Routes Created115
- How to Find a Route on the Chart115
- How to Delete a Route116
- How to Show or Hide All Routes116
- How to Follow a Route117
- Operations When You Follow a Route119
- Routes Menu123
6 Radar126
- How to Transmit, Set the Radar in Stand-By126
- Tuning126
- How to Adjust the Gain127
- How to Reduce the Sea Clutter128
- How to Reduce the Rain Clutter129
- Range Scale129
- Orientation Mode130
- How to Measure the Range and Bearing from Your Ship to a Target131
  - How to Display the Range Rings131
  - How to Set the Number of the Range Rings to Show131
  - How to Select the Range Rings Mode132
  - How to Measure the Range and Bearing to an Object133
  - How to Measure the Range with the VRM133
  - How to Measure the Bearing with the EBL135
  - How to Select the EBL Reference136
- How to Measure the Range and Bearing between Two Targets137
- How to Off-Center the Picture137
- Heading Line138
- How to Reduce Radar Interference138
- Guard Zone138
  - How to Set the Guard Zone138
  - How to Activate or Deactivate the Guard Zone139
  - How to Hide the Guard Zone139
- Watchman139
- How to Show, Hide or Cancel an Active Route140
- How to Show or Hide the Own Ship Icon140
- Echo Color140
- Background Color141
- Dual-Range Display142
- Target Analyzer143
  - How to Activate or Deactivate the Target Analyzer144
  - How to Emphasize Rain Clutter or Target Echoes144
- Rez Boost144
- Bird Mode144
- Radar Menu146
- How to Interpret the Radar Display147
  - False Echoes147
  - Search and Rescue Transponder (SART)149
  - Racon (Radar Beacon)150
- ARPA Operation151
  - How to Show or Hide the ARPA Display151
  - How to Manually Acquire a Target152
  - How to Automatically Acquire a Target152
  - How to Automatically Acquire Targets by Doppler152
  - How to Display Target Data153
  - How to Stop Tracking Targets153
  - ARPA List154
  - How to Clear Lost Targets155
    - CPA/TCPA Alarm155
    - 10CPA Graphic Display156
7 Fish Finder (Sounder)158
- How the Fish Finder Operates158
- How to Transmit, Go to Stand-By158
- How to Select a Display159
- Automatic Fish Finder Operation162
  - How the Automatic Fish Finder Operates162
  - How to Select an Automatic Fish Finder Mode163
- Manual Fish Finder Operation163
- Picture Advance Speed165
- How to Reduce Interference166
- How to Measure Range, Depth to an Object166
- Echo History Display167
- How to Balance Echo Strength167
- Fish Finder Alarms168
- Accu-Fish169
- Rezboost172
- Temperature Graph173
- Sounder Menu174
- Interpreting the Display177
8 File Operations182
- File Format182
- How to Export Points and Routes183
- How to Import Points and Routes184
- How to Export, Import Track184
- How to Backup the Equipment Settings185
- How to Load the Equipment Settings186
- My Timezero ™ Cloud Data Service186
  - How to Save Settings Data to the Cloud186
  - How to Retrieve Settings Data from the Cloud187
- How to Convert Navnet Vx2 Data187
- My Timezero ™ Cloud Data Service188
  - How to Backup Settings to the Cloud188
  - How to Restore Settings from the Cloud188
9 CAMERA/VIDEO/FUSION-Link190
- How to Display a Video Image190
- Video Signal Type191
- How to Set the Video Display191
- Control of FLIR Camera193
- Tracking Active Waypoint, MOB193
- Touch Control on the Camera Display194
- FUSION-Link195
  - How to Access the FUSION Screen and Controls195
  - FUSION Settings197
10 Instrument Display198
- How to Show the Instrument Display198
- Instrument Displays199
- How to Edit the Instrument Displays208
- Instrument Theme213
11 Sirius/XM Satellite Weather Receiver (Bbwx3) Operations214
- Marine Weather Display Introduction214
- Navcenter Weather215
- Sirius Weather219
  - How to Set up for Sirius Weather219
  - How to Display the Sirius Data220
- Weather Icons (Sirius Weather)221
- Weather Data (Navcenter or Sirius)222
- Sirius Satellite Radio225
  - How to Enable the Radio225
  - How to Operate the Radio Controls226
12 Ais, Dsc Message228
- What Is AIS228
- How to Show or Hide the AIS Symbols228
- AIS Target Symbols228
- Proximity AIS Target Alarm229
- How to Ignore Slow Moving AIS Targets230
- How to Hide AIS Targets230
- How to Display an AIS Safety Message231
- How to Display AIS Target Data231
- How to Show or Hide the Target Ids232
- 12.10 AIS List232
- 12.11 When an AIS SART Is Received234
- 12.12 CPA/TCPA Alarm234
- How to Register an AIS or DSC Target to the Buddies List235
- 12.14 CPA Graphic Display236
- AIS Transponder FA-30, FA-50237
- 12.16 DSC Message Information238
13 Other Functions242
- General Menu242
- Units Menu243
- Initial Setup Menu244
- Facsimile Receiver FAX-30249
- Software Update250
- How to Manage Your Charts251
14 Maintenance, Troubleshooting254
- Maintenance254
- Fuse Replacement255
- Life of Parts255
- Troubleshooting256
Appendix 1 Menu Tree258
Appendix 2 Radio Regulatory Information269
Specifications272
Index274

Brand	Furuno
Model	TZTL12F
Category	Monitor
Language	English

Furuno TZTL12F User Manual

Table of Contents

Other manuals for Furuno TZTL12F

Questions and Answers:

Furuno TZTL12F Specifications

Related product manuals