5.1 Observing Waveforms
134
A gauge corresponding to the measurement range of each
channel can be displayed at the left side of the screen, for
confirming measurement values.
The color of the gauge matches the waveform display
color of its input channel.
Displaying Gauges
Setting options (∗. default setting)
Off The gauge is not dis-
played.
CH1, CH2,
CH3, CH4
Display the gauge of the
selected channel.
ALL1∗
Display the upper and
lower limit values of the
gauges of all channels.
ALL2 Display the upper and
lower limit values of the
gauges of all channels
on top of the waveform.
Gauge
1
2
(Open/confirm the setting
information.)
Select from the set-
ting options of
[Gauge].