9.5 Setting Examples
195
Chapter 9 Scheduling Measurement
9
This section introduces examples of setting measurement schedules. All of the examples
are for when measurement is to performed using the Real-time Function.
îš„ About Dead Time
After measurement is performed for the recording time
portion, time is needed for internal processing before
measurement can be resumed (dead time). Measure-
ment is not performed during this dead time.
When you want to perform measurement without any
loss of data, perform measurement with [Cont] set to
[On].
Deadtime
Measuring
9.5 Setting Examples
1
Record data to a CF card from 9:00 to 17:00 on December 10, 2010.
2
Record data periodically to a CF card for each 24 hours every day during a 1-
month period from 9:00 on December 10, 2010.
3
Record data to a CF card for a 1-hour period every 6 hours (9:00, 15:00, 21:00
and 3:00) during a 1-month period from 9:00 on December 10, 2010.
4
Record data to a CF card from 9:00 to 17:00 every day from December 10, 2010,
until the schedule is cancelled.
5
Record data to a CF card from when a trigger is met between 8:30 to 17:15 on
Monday to Friday from December 10, 2010, until the schedule is cancelled.
6
Record data to a CF card from 9:00 to 12:00 and 13:00 to 17:30 on Thursday
every week from December 10, 2010, until the schedule is cancelled.
To Next Page
Loading...
Need help?
General
