Hioki MEMORY HiCORDER MR8880 User Manual

3.1 Pre-Operation Inspection
51
Chapter 3 Basic Operating Procedures
3
Basic Operating
Procedures Chapter 3
3.1 Pre-Operation Inspection
Do not use if damage is
present as you could re-
ceive an electric shock.
Replace the damaged
items.
Metal Exposed
Is the insulation of the measurement
cable to be used damaged, or is bare
metal exposed?
1
No Metal Exposed
2
Peripheral Device Inspection
Before using the instrument the first time, verify that it operates normally to
ensure that no damage occurred during storage or shipping. If you find any
damage, contact your dealer or Hioki representative.
To
If damage is evident, re-
quest repairs.
Yes
Is damage to the instrument evident?
Instrument Inspection
When turning power on
Does the HIOKI logo appear on the
screen?
No
2
The power cord may be
damaged, or the instru-
ment may be damaged in-
ternally. Request repairs.
Is the Waveform screen or Setting
screen displayed?
(When power is turned on the first time
after purchase, the Setting screen
should appear.)
No
Yes
The instrument may be
damaged internally.
Request repairs.
Nothing ap-
pears, or the
display is ab-
normal
Yes
Inspection complete

Hioki MEMORY HiCORDER MR8880 Specifications

General

Brand	Hioki
Model	MEMORY HiCORDER MR8880
Category	Voice Recorder
Language	English