Siemens SINUMERIK MC User Manual

7.4.4 SI telegrams PROFIsafe
The meanings and statuses of the individual bits in the control word and status word are shown
in the "PROFIsafe SI telegrams" diagnostic screen. You can switch between the following
views:
● Status word
● Status word cam (note: only when the cam function is enabled in SINAMICS)
Call
MENU SELECT > Diagnostics > Menu forward key > Safety > SI telegrams > PROFIsafe
Figure 7-8 "PROFIsafe SI telegrams" diagnostic screen
The view of all user data of the control word and status word is displayed using the "Details"
softkey.
Additional information
You can obtain general information about PROFIsafe telegrams in Chapter Control via
PROFIsafe (Page 208).
Diagnostics
7.4 Diagnostic functions in the SINUMERIK ONE Commissioning Tool
Safety Integrated (with SINAMICS S120)
318 Commissioning Manual, 02/2020, A5E46305916B AB

Siemens SINUMERIK MC Specifications

General

Brand	Siemens
Model	SINUMERIK MC
Category	Control Systems
Language	English