SIPROTEC
®
4Devices
4-9
7SA6 Manual
C53000-G1176-C156-2
4.3.1 Annunciations
The scope of the indication (messages) that are given under Annunciation is deter-
mined when settings for the configuration of functions are applied to the SIPROTEC
®
device.
The messages are divided into the following categories, and displayed using DIGSI
®
4
or the operator control panel of the device:
G Event Log: Operating messages: independent of network faults, e.g. messages
about switching operations or monitoring functions;
G Trip Log: Fault messages;
G General interrogation: display of present condition messages;
G Spontaneous messages; continuous display of important messages from the de-
vice; e.g., after faults, switching operations, etc.
Figure 4-3 DIGSI
®
4, annunciations –example
Display in DIGSI
®
4 To view the indications in DIGSI
®
4 Online:
• Select Annunciation in the navigation (left) window.
All annunciation groups are shown in the data (right) window.
• Double click on an annunciation group in the data window, such as Event Log.
The data and time appear. Double click on the entry. The list of indications appears.
To Next Page
Loading...
Need help?
General