To Next Page

To Previous Page

4-17SA6 Manual

C53000-G1176-C156-2

SIPROTEC

4 Devices 4

This chapter provides an overview of the family of SIPROTEC

4 devices and the in-

tegration of the devices into power plants and substation control systems. Principle

procedures are introduced for setting the devices, controlling primary equipment with

the devices, and performing general operations with the devices.

Please note the SIPROTEC

4 family of devices is described in general in this chap-

ter, and the examples shown may differ in detail from a specific device. Also, depend-

ing on the type and version of a specific device, some of the functions discussed may

not be available.

Details about the extent of the functions of the devices, the individual settings, and the

representation structure of the system data are found in the following chapters and the

DIGSI

4 instruction book.

4.1 General 4-2

4.2 Operator Control Facilities 4-5

4.3 Information Retrieval 4-8

4.4 Control 4-14

4.5 Manual Overwrite / Tagging 4-16

4.6 General about the Setting Procedures 4-17

4.7 Configuration of the Scope of Device Functions 4-20

4.8 Configuration of Inputs and Outputs (Configuration Matrix) 4-21

4.9 Programmable Logic CFC 4-24

4.10 Power System Data 4-26

4.11 Setting Groups 4-27

4.12 General Device Settings 4-29

4.13 Time Synchronization 4-30

4.14 Serial Interfaces 4-31

4.15 Passwords 4-33

Siemens siprotec 7SA6 User Manual

Other manuals for Siemens siprotec 7SA6