4st 9.9/15/20 2008
1
5) Tools
Use specified special tools to prevent damaging to parts
and to perform work safely and surely. Be sure to follow
installation procedures described in this manual and use
tightening torque specified.
6) Recommendations on Service
Remove foreign substances and dirt from outboard motor
and individual parts by cleaning. Apply recommended oil
or grease to rotating areas and sliding surfaces. After
individual assembly, always perform verifications such as
ensuring smooth movement and sealing.
1-3
E_MFS20C_ch01_090105.qxd 09.1.20 5:09 PM ページ 3
To Next Page
Loading...
Need help?
General
