5
5-65
4st 9.9/15/20 2008
7. Remove starter spring q.
48) Inspection of Recoil Starter
1. Check ratchet, starter lock and all springs. Replace if any
deformation, wear or damage is found.
2. Check reel and starter case. Replace if any crack or damage
is found.
3. Check starter rope. Replace if any wear, unraveling or
damage is found.
It is not necessary to remove starter spring from
starter case if it is not necessary to replace it.
Starter spring can be inspected without
removing from starter case.
q Starter Spring
E_MFS20C_ch05_090105.qxd 09.1.20 5:25 PM ページ 65