5-20
Power Unit
4st 9.9/15/20 2008
5) Removing Plunger and Oil Strainer
1. Put removed power head ass’y 1 upside down on the work
bench.
2. Remove plunger 2 from power head ass'y 1.
3. Remove oil strainer 3 from power head ass'y 1.
1
6) Inspection of Oil Strainer
1. Check oil strainer 1 for dirt and clogging. Clean, or replace if
necessary.
Before oil strainer hose, note arrangement of
the hose.
7) Flywheel and electrical components
1. Remove recoil starter, belt cover and starter pulley.
Flywheel puller kit :
P/N. 369-72211-0
2. Loosen flywheel nut.
E_MFS20C_ch05_090105.qxd 09.1.20 5:25 PM ページ 20
To Next Page
Loading...
Need help?
General
