TOHATSU MFS 9.9 User Manual

5
5-27
4st 9.9/15/20 2008
1. Remove power unit. (Refer to the section for removing
power unit.)
2. Remove magneto related parts from power unit.
3. Remove intake manifold, carburetor and fuel pump.
4. Remove electrical system parts from power unit.
· No.1 piston is to be at top dead center of
compression stroke.
· Removal or installation of parts can be made
easier when some of them are assembled
together.
11) Removing Cylinder Head
2
43
E_MFS20C_ch05_090105.qxd 09.1.20 5:25 PM ページ 27

TOHATSU MFS 9.9 Specifications

General

Brand	TOHATSU
Model	MFS 9.9
Category	Outboard Motor
Language	English