6-10
Lower Unit
4st 9.9/15/20 2008
6)
Removing Propeller Shaft Housing Ass'y
1. Remove propeller shaft ass'y.
2. Use commercially available puller to remove.
5) Inspection of Water Pump
1. Check pump case (upper) 1 for deformation. Replace if
necessary.
2. Check impeller 2 and pump case liner 3 for crack and
wear. Replace if necessary.
3. Check key 4, water pump guide plate 5 and drive shaft
groove a for wear. Replace if necessary.
Use a plastic hammer to remove the part if it
cannot be removed by inserting a bladed screw
driver.
E_MFS20C_ch06_081216.qxd 09.1.20 5:27 PM ページ 10