1-11
1
4st 9.9/15/20 2008
8) Inspection of Starting Switch and
Stop Switch
1. Press start switch 1 or turn main switch to START 2 to
check that engine starts.
2. Turn main switch to OFF 3 to check that engine stops.
ON
OFF
START
2
3
∫
å Tiller Handle Model — Push and hold to stop
∫ Remote Control Model
3. Press stop switch 4 hard or pull out lockplate 5 from stop
switch 4 to check that engine stops.
4
5
å
å Tiller Handle Model
∫ Remote Control Model
E_MFS20C_ch01_090105.qxd 09.1.20 5:09 PM ページ 11