3-20
Maintenance
4st 9.9/15/20 2008
17) Throttle Cable
For F type
1. Turn throttle grip to START position.
Adjust cable tension so that it moves
approximately 1mm when pushed lightly with a
finger.
2. Bring alignment mark 1 of throttle drum to pointer 2
located on the bottom cowl, adjust throttle cable properly,
and tighten with nut 3.
2
1
3
3. Turn throttle grip to wide open throttle position.
E_MFS20C_ch03_090105.qxd 09.1.20 5:23 PM ページ 20