08/2012
0-3
WorkCentre 5021/5019
0.1, 0.2
Introduction
Initial Issue
0.1 Getting to know this Service Manual
This manual is used as the standard service manual for WorkCentre 5021/ 5019.
0.2 How to use the Service Manual
This manual describes the standard procedures for the servicing this product. Refer to Chapter
1 Service Call Procedure for efficient and effective servicing during maintenance calls.
For more information on the options, refer to the options manual.
2.1 Contents of Manual
This manual is divided into 10 chapters as described below.
• Chapter 1 Service Call Procedure
This chapter describes the general work and servicing procedures for the maintenance of
this product.
• Chapter 2 Troubleshooting
This chapter describes the troubleshooting procedures other than image quality trouble-
shooting for this product.
• Chapter 3 Image Quality Troubleshooting
This chapter describes the image quality troubleshooting procedures for this product.
• Chapter 4 Disassembly/Assembly and Adjustment
This chapter describes the disassembly, assembly, adjustment and replacement proce-
dures for components of this product.
• Chapter 5 Parts List
This chapter contains the spare parts information for this product.
• Chapter 6 General
This chapter contains the following information.
6.1 Specifications
6.2 Tools/Service Consumables/Consumables
6.3 Service Data
6.4 Service Mode
6.6 KO PROGRAM# LIST
• Chapter 7 Wiring Data
This chapter contains the information about the Wiring Connector List/Locations, the Wir-
ing Data, and the BSD for this machine.
• Chapter 8 Accessories (not yet issued)
• Chapter 9 Installation/Removal
This chapter contains the installation and removal procedures for this product and the
options that are specific to it.
• Chapter 10 Mechanism & Functions Overview (not yet issued)
2.2 Information on Updating
This manual will be sent to each Service Center as specified below. Revisions must be incor-
porated correctly to keep the manual up-to-date.
Updating Procedure:
• When the manual is updated, the issue number 'Ver. 1' will be changed to Ver. 1.1, Ver.
1.2, and so on.
To Next Page
Loading...
Need help?
General
