ABB ACS355 User Manual

152 Program features
 Settings
 Diagnostics
Parameter
Additional information
1101 Local control mode reference type selection
1102 EXT1/EXT2 selection
1106 PID1 activation
1107 REF2 minimum limit
1501 PID2 output (external controller) connection to AO
9902 PID control macro selection
Groups 40 PROCESS PID SET
1…41 PROCESS PID SET 2
PID1 settings
Group 42 EXT / TRIM PID PID2 settings
Actual signal
Additional information
0126/0127 PID 1/2 output value
0128/0129 PID 1/2 setpoint value
0130/0131 PID 1/2 feedback value
0132/0133 PID 1/2 deviation
0170 AO value defined by Sequence programming

ABB ACS355 Specifications

General

Input Voltage	200 V to 240 V AC, 380 V to 480 V AC
Frequency	47 Hz to 63 Hz
Control Method	Scalar control
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Communication Interfaces	Modbus RTU, CANopen
Enclosure Rating	IP20
Operating Temperature	-10°C to +50°C (14°F to 122°F)
Storage Temperature	-40°C to +70°C (-40 to +158 °F)
Humidity	95% RH (non-condensing)
Altitude	Up to 1000 m (3280 ft) without derating