ABB ACS355 User Manual

Fieldbus control with fieldbus adapter 325
Fieldbus control with
fieldbus adapter
What this chapter contains
The chapter describes how the drive can be controlled by external devices over a
communication network through fieldbus adapter.
System overview
The drive can be connected to an external control system through a fieldbus adapter
or embedded fieldbus. For embedded fieldbus control, see chapter Fieldbus control
with embedded fieldbus on page 301.
Fieldbus adapter is connected to drive terminal X3.

ABB ACS355 Specifications

General

Input Voltage	200 V to 240 V AC, 380 V to 480 V AC
Frequency	47 Hz to 63 Hz
Control Method	Scalar control
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Communication Interfaces	Modbus RTU, CANopen
Enclosure Rating	IP20
Operating Temperature	-10°C to +50°C (14°F to 122°F)
Storage Temperature	-40°C to +70°C (-40 to +158 °F)
Humidity	95% RH (non-condensing)
Altitude	Up to 1000 m (3280 ft) without derating