To Next Page

To Previous Page

336 Fault tracing

parameter 1604 FAULT RESET SEL. When the fault has been removed, the motor

can be restarted.

Fault history

When a fault is detected, it is stored in the fault history. The latest faults are stored

together with the time stamp.

Parameters 0401 LAST FAULT, 0412 PREVIOUS FAULT 1 and 0413 PREVIOUS

FAULT 2 store the most recent faults. Parameters 0404…0409 show drive operation

data at the time the latest fault occurred. The assistant control panel provides

additional information about the fault history. See section Fault logger mode on page

101 for more information.

Other manuals for ABB ACS355

Questions and Answers:

Need help?

Do you have a question about the ABB ACS355 and is the answer not in the manual?

General

Input Voltage	200 V to 240 V AC, 380 V to 480 V AC
Frequency	47 Hz to 63 Hz
Control Method	Scalar control
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Communication Interfaces	Modbus RTU, CANopen
Enclosure Rating	IP20
Operating Temperature	-10°C to +50°C (14°F to 122°F)
Storage Temperature	-40°C to +70°C (-40 to +158 °F)
Humidity	95% RH (non-condensing)
Altitude	Up to 1000 m (3280 ft) without derating