Cisco Catalyst 9400 User Manual

PurposeCommand or Action
Saves your entries in the configuration file.copy running-config startup-config
Example:
Step 14
Device# copy running-config
startup-config
Displays the destination profile configuration
for the specified profile or all configured
profiles.
show call-home profile {name |all}
Step 15
Configuring the Call Home Service for Direct Cloud Access through an HTTPs
Proxy Server
The Call Home service can be configured through an HTTPs proxy server. This configuration requires no
user authentication to connect to CSSM.
Authenticated HTTPs proxy configurations are not supported.
Note
To configure and enable the Call Home service through an HTTPs proxy, complete the following steps:
All steps are required unless specifically called-out as “(Optional)”.
Note
Procedure
PurposeCommand or Action
Enables privileged EXEC mode. Enter your
password, if prompted.
enable
Example:
Step 1
Device> enable
Enters global configuration mode.configure terminal
Example:
Step 2
Device# configure terminal
Enables Call Home as the transport mode.license smart transport callhome
Example:
Step 3
Device(config)# license smart transport
callhome
Enables the Call Home feature.service call-home
Example:
Step 4
Device(config)# service call-home
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
153
Smart Licensing Using Policy
Configuring the Call Home Service for Direct Cloud Access through an HTTPs Proxy Server

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English