Cisco Catalyst 9400 User Manual

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Step 3
Device(config)# end
Encrypts the private-config file and saves the
file in an encrypted format.
write memory
Example:
Step 4
Device# write memory
Disabling Secure Storage
Before you begin
To disable Secure Storage feature on a device, perform this task:
Procedure
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Step 1
Device# configure terminal
Disables the Secure Storage feature on your
device. When secure storage is disabled, all the
user data is stored in plain text in the NVRAM.
no service private-config-encryption
Example:
Device(config)# no service
private-config-encryption
Step 2
Returns to privileged EXEC mode.end
Example:
Step 3
Device(config)# end
Decrypts the private-config file and saves the
file in plane format.
write memory
Example:
Step 4
Device# write memory
Verifying the Status of Encryption
Use the show parser encrypt filestatus command to verify the status of encryption. The following command
output indicates that the feature is available but the file is not encrypted. The file is in ‘plain text’ format.
Device#show parser encrypt file status
Feature: Enabled
File Format: Plain Text
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
348
Configuring Secure Storage
Disabling Secure Storage

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English