Cisco Catalyst 9400 User Manual

7 C9400-LC-48UX 4 accepted 350 189 203 350 15
-- Fan Tray 0 accepted 350 -- -- 350 --
--- -------------------- -------- -------- ------ ------------- ---- ------ -----
Total 2030
Device# show power detail
Power Fan States
Supply Model No Type Capacity Status 1 2 3 4
------ -------------------- ---- -------- ------------ -----------------------
PS1 C9400-PWR-3200AC AC 3200 W active good good good good
PS2 C9400-PWR-3200AC AC 3200 W active good good good good
PS3 C9400-PWR-3200AC AC 3200 W active good good good good
PS4 C9400-PWR-3200AC AC 3200 W active good good good good
PS5 C9400-PWR-3200AC AC 3200 W active good good good good
PS6 C9400-PWR-3200AC AC 3200 W active good good good good
PS7 C9400-PWR-3200AC AC 3200 W active good good good good
PS8 C9400-PWR-3200AC AC 3200 W active good good good good
PS Current Configuration Mode : Combined
PS Current Operating State : Combined
Power supplies currently active : 8
Power supplies currently available : 8
Power Summary Maximum
(in Watts) Used Available
------------- ------ ---------
System Power 2030 2030
Inline Power 106 23570
------------- ------ ---------
Total 2136 25600
Automatic Linecard Shutdown : Enabled
Power Budget Mode : Dual Sup
autoLC Power Out of In
Mod Model No Priority State Budget Instantaneous Peak Reset Reset
--- -------------------- -------- -------- ------ ------------- ---- ------ -----
1 C9400-LC-24XS 0 accepted 200 87 88 200 10
2 C9400-LC-48T 1 accepted 65 35 43 65 5
3 C9400-SUP-1 0 accepted 400 235 253 400 130
4 C9400-SUP-1 0 accepted 400 235 253 400 130
5 C9400-LC-48T 2 accepted 65 35 37 65 5
6 C9400-LC-24XS 3 accepted 200 87 88 200 10
7 C9400-LC-48UX 4 accepted 350 189 203 350 15
-- Fan Tray 0 accepted 350 -- -- 350 --
--- -------------------- -------- -------- ------ ------------- ---- ------ -----
Total 2030
Power Management Considerations
It is possible to configure a switch that requires more power than the power supplies provide.
• The power requirements for the installed modules exceed the power provided by the power supplies.
• If the switch has a single power supply module that is unable to meet power requirements, the
following error message is displayed:
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
231
Environmental Monitoring and Power Management
Power Management Considerations

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English