Cisco Catalyst 9400 User Manual

Device(config)# end
Additional References for Secure Copy
Related Documents
Document TitleRelated Topic
Configuring Secure ShellSecure Shell Version 1 and 2 support
Technical Assistance
LinkDescription
http://www.cisco.com/cisco/web/support/index.htmlThe Cisco Support and Documentation website provides
online resources to download documentation, software,
and tools. Use these resources to install and configure
the software and to troubleshoot and resolve technical
issues with Cisco products and technologies. Access to
most tools on the Cisco Support and Documentation
website requires a Cisco.com user ID and password.
Feature Information for Secure Copy
This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Feature InformationFeatureRelease
The Secure Copy feature provides a secure and
authenticated method for copying device
configurations or device image files. SCP relies on
SSH, an application and protocol that provide a
secure replacement for the Berkeley r-tools suite.
The following commands were introduced or
modified: debug ip scp and ip scp server enanle.
Secure CopyCisco IOS XE Everest 16.6.1
SSH bulk mode enables certain optimizations to
enhance the throughput performance of procedures
involving large amount of data transfer. This mode
can be enabled by using the ip ssh bulk-mode
global configuration command.
Secure Copy
Performance
Improvements
Cisco IOS XE Amsterdam
17.2.1
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
324
Secure Copy
Additional References for Secure Copy

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English