Cisco Catalyst 9400 User Manual

Examples: Configuring SDM Templates
Device(config)# sdm prefer access
Device(config)# exit
Device# reload
Proceed with reload? [confirm]
Additional References for SDM Templates
Related Documents
Document TitleRelated Topic
Command Reference (Catalyst
9400 Series Switches)
For complete syntax and usage information for the commands used in
this chapter.
Feature History for SDM Templates
This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Feature InformationFeatureRelease
Standard SDM templates can be used to configure
system resources to optimize support for specific
features.
SDM TemplateCisco IOS XE Everest 16.6.1
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
257
Configuring SDM Templates
Examples: Configuring SDM Templates

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English