Cisco Catalyst 9400 User Manual

MYDNS 12 Custom
MYDOMAIN 13 Custom
MYHTTP 10 Custom
MYSSL 11 Custom
show ip nbar protocol-discovery protocol CUSTOM_APP
Device# show ip nbar protocol-id MYSSL
Protocol Name id type
----------------------------------------------
MYSSL 11 Custom
NBAR2 Dynamic Hitless Protocol Pack Upgrade
Protocol packs are software packages that update the NBAR2 protocol support on a device without replacing
the Cisco software on the device. A protocol pack contains information on applications officially supported
by NBAR2 which are compiled and packed together. For each application, the protocol-pack includes
information on application signatures and application attributes. Each software release has a built-in
protocol-pack bundled with it.
Protocol packs provide the following features:
• They are easy and fast to load.
• They are easy to upgrade to a higher version protocol pack or revert to a lower version protocol pack.
• They do not require the switch to be reloaded.
When using switch stacking, ensure that each switch has the same Protocol Pack file loaded. If you execute
the ip nbar protocol-pack flash protocol-pack-file command on the primary switch in the stack, any switch
in the stack that does not have the file loaded will be reloaded due to a configuration mismatch.
Warning
NBAR2 protocol packs are available for download on Cisco Software Center from this URL:
https://software.cisco.com/download/home .
Prerequisites for the NBAR2 Protocol Pack
Before loading a new protocol pack, you must copy the protocol pack to the flash on all the switch members.
To load a protocol pack, see Loading the NBAR2 Protocol Pack, on page 204 .
Loading the NBAR2 Protocol Pack
Procedure
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
• Enter your password if prompted.
Device> enable
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
204
Configuring Application Visibility and Control in a Wired Network
NBAR2 Dynamic Hitless Protocol Pack Upgrade

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English