PurposeCommand or Action
Standby: PID:C9500-24Y4C,SN:CAT2344L4GJ
INSTALLED on Sep 04 01:01:46 2020
EDT
Downloading a Policy File from CSSM
If you have requested a custom policy or if you want to apply a policy that is different from the default that
is applied to the product instance, complete the following task:
Before you begin
Supported topologies:
• No Connectivity to CSSM and No CSLU
• CSLU Disconnected from CSSM
Procedure
Step 1 Log in to the CSSM Web UI at https://software.cisco.com and click Smart Software Licensing.
Log in using the username and password provided by Cisco.
Step 2 Follow this directory path: Reports > Reporting Policy.
Step 3 Click Download, to save the .xml policy file.
You can now install the file on the product instance. See Installing a File on the Product Instance, on page
160.
Uploading Usage Data to CSSM and Downloading an ACK
To upload a RUM report to CSSM and download an ACK when the product instance is not connected to
CSSM or CSLU, complete the following task:
Before you begin
Supported topologies: No Connectivity to CSSM and No CSLU
Procedure
Step 1 Log in to the CSSM Web UI at https://software.cisco.com.
Log in using the username and password provided by Cisco.
Step 2 Select the Smart Account (upper left-hand corner of the screen) that will receive the report.
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
159
Smart Licensing Using Policy
Downloading a Policy File from CSSM
To Next Page
Loading...
Need help?
General