Cisco Catalyst 9400 User Manual

PurposeCommand or Action
Lists the contents of the BOOT environment
variable (if set), the name of the configuration
show boot
Example:
Step 5
file pointed to by the CONFIG_FILE
Device# show boot
environment variable, and the contents of the
BOOTLDR environment variable.
• The boot global configuration command
changes the setting of the CONFIG_FILE
environment variable.
(Optional) Saves your entries in the
configuration file.
copy running-config startup-config
Example:
Step 6
Device# copy running-config
startup-config
Manually Booting the Switch
By default, the switch automatically boots up; however, you can configure it to manually boot up.
Before you begin
Use a standalone switch for this task.
Procedure
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Step 1
Device# configure terminal
Enables the switch to manually boot up during
the next boot cycle.
boot manual
Example:
Step 2
Device(config)# boot manual
Returns to privileged EXEC mode.end
Example:
Step 3
Device(config)# end
Verifies your entries.show boot
Step 4
Example:
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
62
Performing Device Setup Configuration
Manually Booting the Switch

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English