Cisco Catalyst 9400 User Manual

PurposeCommand or Action
default remote username or password (see Steps
2 and 3).
Device(config)# end
Copies the running configuration or startup
configuration file to the specified location on
the FTP server.
Do one of the following:
Step 6
• copy system:running-config ftp:
[[[//[username [:password
]@]location]/directory ]/filename ] or
• copy nvram:startup-config ftp:
[[[//[username [:password
]@]location]/directory ]/filename ]
Example:
Device# copy system:running-config ftp:
Examples
Storing a Running Configuration File on an FTP Server
The following example copies the running configuration file named runfile-confg to the netadmin1 directory
on the remote host with an IP address of 172.16.101.101:
Device# copy system:running-config ftp://netadmin1:mypass@172.16.101.101/runfile-confg
Write file runfile-confg on host 172.16.101.101?[confirm]
Building configuration...[OK]
Connected to 172.16.101.101
Device#
Storing a Startup Configuration File on an FTP Server
The following example shows how to store a startup configuration file on a server by using FTP to copy the
file:
Device# configure terminal
Device(config)# ip ftp username netadmin2
Device(config)# ip ftp password mypass
Device(config)# end
Device# copy nvram:startup-config ftp:
Remote host[]? 172.16.101.101
Name of configuration file to write [start-confg]?
Write file start-confg on host 172.16.101.101?[confirm]
![OK]
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
296
Managing Configuration Files
Examples

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English