Cisco Catalyst 9400 User Manual

PurposeCommand
Removes a specific MAC address.clear mac address-table dynamic address
mac-address
Removes all addresses on the specified physical port
or port channel.
clear mac address-table dynamic interface
interface-id
Removes all addresses on a specified VLAN.clear mac address-table dynamic vlan vlan-id
Displays the time and date configuration.show clock [detail]
Displays the Layer 2 multicast entries for all VLANs
or the specified VLAN.
show ip igmp snooping groups
Displays MAC address table information for the
specified MAC address.
show mac address-table address mac-address
Displays the aging time in all VLANs or the specified
VLAN.
show mac address-table aging-time
Displays the number of addresses present in all
VLANs or the specified VLAN.
show mac address-table count
Displays only dynamic MAC address table entries.show mac address-table dynamic
Displays the MAC address table information for the
specified interface.
show mac address-table interface interface-name
Displays the MAC address table move update
information.
show mac address-table move update
Displays a list of multicast MAC addresses.show mac address-table multicast
Displays the MAC notification parameters and history
table.
show mac address-table notification {change |
mac-move | threshold}
Displays the secure MAC addresses.show mac address-table secure
Displays only static MAC address table entries.show mac address-table static
Displays the MAC address table information for the
specified VLAN.
show mac address-table vlan vlan-id
Configuration Examples for Device Administration
Example: Setting the System Clock
This example shows how to manually set the system clock:
Device# clock set 13:32:00 23 July 2013
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
37
Administering the Device
Configuration Examples for Device Administration

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English