Cisco Catalyst 9400 User Manual

PurposeCommand or Action
Device(config)# mac address-table
notification mac-move
Returns to privileged EXEC mode.end
Example:
Step 6
Device(config)# end
Verifies your entries.show running-config
Example:
Step 7
Device# show running-config
(Optional) Saves your entries in the
configuration file.
copy running-config startup-config
Example:
Step 8
Device# copy running-config
startup-config
What to do next
To disable MAC address-move notification traps, use the no snmp-server enable traps mac-notification
move global configuration command. To disable the MAC address-move notification feature, use the no mac
address-table notification mac-move global configuration command.
You can verify your settings by entering the show mac address-table notification mac-move privileged
EXEC commands.
Configuring MAC Threshold Notification Traps
When you configure MAC threshold notification, an SNMP notification is generated and sent to the network
management system when a MAC address table threshold limit is reached or exceeded.
Follow these steps to configure the switch to send MAC address table threshold notification traps to an NMS
host:
Procedure
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
• Enter your password if prompted.
Device> enable
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
31
Administering the Device
Configuring MAC Threshold Notification Traps

Cisco Catalyst 9400 Specifications

General

Brand	Cisco
Model	Catalyst 9400
Category	Switch
Language	English